Honeycomb Conveyor Belts Also known as Flat Wire belting for pizza
oven baking
Descriptions :
Honeycomb belting, also known throughout the industry as Flat Wire
belting, is a straight-running belt with an extremely high
strength-to-weight ratio. It is available in a wide variety of
aperture configurations to suit applications as diverse as casting,
baking, drainage and packaging. Honeycomb is constructed from
formed flat wire strips connected by cross rods running through the
width of the mesh. The rods are finished with either welded button
edges or hooked edges. It is a strong, lightweight, positively
driven belt. A large open area makes this belt particularly
suitable for processes such as washing, drying, cooling and
cooking.
Quick Detail :
2)Materials Available
• Stainless Steel 1.4301 (304)
• Stainless Steel 1.4401 (316)
• Stainless Steel 1.4541 (321)**
• Stainless Steel 1.4828**
• Mild Steel
• Galvanised Mild Steel
**Limited specifications available
3)Drive Components:
When choosing the most appropriate sprocket material for your
application,
it is important to look at the conditions under which the belt will
operate.
Conditions such as abrasion, corrosion, high/low temperature
variations,
surrounding temperature, type of process performed, etc. all have
an impact
on sprocket selection.
4)Belt specifications
Honeycomb belt is available in a wide range of specifications. The
examples listed in the following tables are
the most common. Belts can be up to 5 metres wide, alternative
specifications are available, please contact
our Technical Sales Engineers for informatio
| European Standard |
| S/N | Cross Rod pitch (mm) | Nominal Lateral Pitch(mm) | Flat Strip(mm) | Cross Rod diameter (mm ) |
| ES001* | 13.7 | 14.6 | 10x1 | 3 |
| ES 003 | 26.2 | 15.55 | 12x1.2 | 4 |
| ES 004 | 27.4 | 15.7 | 9.5x1.25 | 3 |
| ES 006 | 27.4 | 24.7 | 9.5x1.25 | 3 |
| ES 012 | 28.6 | 15 | 9.5x1.25 | 3 |
| ES 013 | 28.6 | 26.25 | 9.5x1.25 | 3 |
| ES 015 | 28.4 | 22.5 | 15x1.2 | 4 |
| * Available button edge (welded washer) only |
| Imperial Standard |
| S/N | Cross Rod(mm) | Nominal Lateral Pitch (mm) | Flat Strip (mm) | Cross Rod (mm) |
| IS 101A* | 12.85 | 14.48 | 9.5x1.2 | 3 |
| IS 101B* | 13.72 | 14.48 | 9.5x1.2 | 3 |
| IS 101C* | 14.22 | 15.46 | 9.5x1.2 | 3 |
| IS 102A | 28.58 | 15.46 | 9.5x1.2 | 3 |
| IS 102B | 27.53 | 15.22 | 9.5x1.2 | 3 |
| IS 102C | 26.97 | 15.22 | 9.5x1.2 | 3 |
| IS 103 | 28.58 | 26.19 | 9.5x1.2 | 3 |
| IS 104 | 26.97 | 17.78 | 12.7x1.6 | 4.9 |
| IS 105 | 26.97 | 25.4 | 12.7x1.6 | 4.9 |
| IS 106 | 28.58 | 25.4 | 15.9x1.6 | 4.9 |
| IS 107 | 38.1 | 38.1 | 15.9x1.6 | 4.9 |
| IS 108 | 50.8 | 50.8 | 15.9x1.6 | 4.9 |
| IS 109 | 76.2 | 76.2 | 15.9x1.6 | 4.9 |
| * Available button edge (welded washer) only |
Individual Specifications
Apart from the standard sizes above we are able to provide custom
built specifications and the table below gives the framework of
availability. Please contact our Technical Sales team to discuss
availability in detail as further restrictions do apply to flat
strip section size required.
| Cross Rod Dia. | Cross Rod Pitch | Edge |
| (mm) | from (mm) | to (mm) | Welded | Clinched |
| 3.00 | 12.7 | 30.0 | • | • |
| 4.00 | 13.7 | 29.0 | • | • |
| 5.00 | 25.0 | 28.0 | • | • |
Applications :
Honeycomb belt has many and varied uses, below is a list of typical
applications. If you have an application that is not listed below,
contact our Technical Sales Engineers to see if Honeycomb belts are
right for your needs.
Notice :
- Please send to us about your request with specificaions description
or drawings
- Payment term: TT,LC ,or any insurance order way through other
platform
- Delivery time : it is very fast if it is standard size .
- Sprockets and other drive components can also be supplied as per
request. Please contact us for more detailed specifications
regarding our flat wire belts and corresponding sprockets.
